.iso Size: — 3.38 GB?Compression Format: RAR?Image Format: .iso
Posted by: boards.sega.com?Posted on: 4/22/2008
So here we are with Leo4Allv3. MD5 checksum should be :?48b3bea091a9247238b6534098e102f9
I have included a PPF patch that swaps out the AppleNforceATA.kext for an older version for those that get kernel panics. The MD5 for this swap should be:?34a17bd1f79b4c379d95d48a94911073
You might wonder what's new and why bother downloading. I will try to list the main changes with this update and a comprehensive list of what options are available.
First and most importantly is a totally rebuilt filesystem. The advantage with this is I no longer had to script a repair permissions from the DVD. This speeds install a good bit for most people. Don't worry if the timer says some outrageous time, as it does not calculate it correctly. The initial package install is very large and takes the most time, but once its done the install is almost done. I still recommend running repair permissions from Leopard once your all loaded up to fix some errors, but none of these will stop the system from booting. If you run it twice you should see zero errors on Intel and 2 SUID files on AMD. There is an install script that crashes on AMD machines causing this, but to keep everything perfect on Intel I chose to leave the script intact.?This DVD now supports AHCI with more than 2 drives thanks to the updated kext's posted by Cyclonefr.?Also fixed this go around is X11 for both Intel and AMD. If, when you close it the first time, cpu usage jumps to 100% open terminal and type xeyes & to fix it. You will need to reboot after, but it should never glitch again.?Due to some complaints I removed my old logo and replaced it with my favorite desktop background, hope you like it.
There is no longer a ./RemoveVideo script, it has been updated and is now called?./options.?If you boot with -s at the Darwin prompt and mount your drive with?/sbin/fsck -fy?/sbin/mount -uw /?./options?you will see options to remove video drivers, account loop fix, and extensions repair. These are the most common issues so I have just automated them. If you do the account loop fix be sure to setup a proper account once booted into Leopard.
From inside the installer you will notice a lot of new options, I will cover the main ones of interest:
You now have a choice between ACPIPlatforms, version 1.1.0 is the default install if nothing else is selected. This is needed for the laptop Power Management bundle to function, but if you have an older system you can choose 1.0.3 from Tiger. Alternately you can choose the stock version 1.2.1. Included inside version 1.1.0 and 1.2.1 is ACPIPS2Nub(proper version) for your PS2 support. There should be no more PS2 issues!
I put in lots of choices for different versions based on bus speed if you want it to show your proper memory speed, or if you want your hack to look like a real mac. The default install if nothing is selected is Netkas improved version 27.?Options are:?DDR667?DDR800?DDR1066?DDR1333?iMac?MacBook?MacPro
I have added Netkas 9.2.0 sleep kernel, and 9.2.2 binpatched kernel any Modbin(Be warned this does not work on all AMD machines! SSE3 CPU is required!). The default install is still Netkas 9.2.0 speedstep kernel. There are also the Stock kernels(vanilla) 9.2.0/9.2.2
For those that have issues with FireWire, or those that just want to speed their boot time a little. This moves all of the IOFireWire kext's to /FireWire folder in the root of your install drive.
About This Mac:
This is my own little installer to customize "About this Mac" with your processor info. No it does not fix memory speed, you have to do that with AppleSMBIOS. It should work for all languages and should report overclocked CPU's properly.
By popular demand I added the laptop power management bundle to the install. You will still need to set it up in system preferences. This is known to have a few minor bugs. It may not report the proper time remaining or any time remaining for that matter, so use at your own risk. If you select this please do not select an ACPIPlatform, as this requires version 1.1.0.
AMD System Fix:
You will notice it is checked and greyed out by default. To take out a lot of user error (people forgetting to check it for their AMD systems) I have added a script to detect the CPU and patch accordingly. When its running it will echo your processor information in the install log (if you show all). It will then skip the patch process if your on Intel or patch if its an AMD. I hope it works well for everyone!
This option is checked and greyed out by default. It is Dense's script to install EFI and make the partition active. If you already have an existing bootloader (like from Vista) on the same logical drive it will not overwrite it. It will however flag the partition you installed to active, so you will have to manually set your Windows partition active again if needed.
(NOTE- JMicron is the only driver that always installs so please choose at least 1 option, some will have to choose 2 [if you have Marvell IDE and Intel SATA for example]) If your not sure you can click all but 1 Nforce, as they will overwrite each other.
Nforce Old - This is the older version of Medevils Nforce(1.0.2) driver. Install this if you have issues with SATA enabled causing a panic. Known to work for some Nforce3 users.
Nforce Test- If you have a SATA DVD or do not have issues booting the DVD normally choose the NforceTest.
SiliconImage3132 - I have not found anyone that uses this specific chipset to confirm if it works.
VIA, SiS, Marvell and SB - Please install this if you are using any of these chipsets. If you have a Marvell IDE drive please install this as they should be supported. I have added many ID's here so I hope they all work! This choice installs AppleVIAATA, AppleOnboardPCATA and AppleGenericPCATA. Confirmed working for SiS!
SAS - By request I added support for this, as of my writing this its untested. Hopefully it works.
Intel ICHx- If you have ICH7/8/9 chipsets you should install this. This is the modified version by -Dune- to support more than 2 drives and fix the over 2Gigs of RAM panics.
These choices have not changed much, only added support for STAC9271 by request. If your not sure what chipset you have, please choose AzaliaAudio(for most HD) or AC97Audio.?Choices are:?ALC850/882/883/888/889?AC97Audio?ADI1988?STAC9271?AzaliaAudio
I have updated many of these packages.?ATI- there are options for:?3850?3870?2600XT(PCIE)?2600XT(AGP)?3870X2?2600PRO(PCIE)?2600PRO(AGP)?X1600(PCIE)?X1600(AGP)?X19X0?X1400 Mobility
Nvidia- I have updated the drivers to the latest available from the Mac Pro's and edited to include all Device ID's I could verify. This should cover mostly all 6XXX/7XXX/8XXX series cards. Here are the ID's supported(not all confirmed working yet) Feel free to search for yours on the list.?0x033310de 0x033010de 0x033110de 0x030110de 0x030210de 0x034410de 0x034310de 0x034110de 0x034210de 0x031410de 0x031110de 0x031210de 0x032610de 0x032310de 0x032110de 0x032210de 0x014f10de 0x00f310de 0x022110de 0x016310de 0x016210de 0x016110de 0x016210de 0x016010de 0x014110de 0x00f210de 0x014010de 0x00f110de 0x014210de 0x00f410de 0x014310de 0x014710de 0x004110de 0x00c110de 0x004710de 0x00f610de 0x00C010de 0x004510de 0x00f910de 0x00c210de 0x004010de 0x00f910de 0x004310de 0x004810de 0x021810de 0x00c310de 0x016710de 0x016810de 0x014810de 0x00c810de 0x00c910de 0x03d010de 0x03d110de 0x03d210de 0x024110de 0x024210de 0x01df10de 0x039310de 0x01d110de 0x01d310de 0x01dd10de 0x039210de 0x02e110de 0x039110de 0x039410de 0x00f510de 0x009210de 0x009110de 0x029110de 0x029010de 0x029310de 0x029410de 0x009810de 0x009910de 0x029810de 0x029910de 0x029510de 0x042310de 0x042210de 0x042110de 0x040210de 0x040010de 0x061110de 0x019310de 0x019110de 0x060010de 0x040710de 0x039810de 0x022210de
NVinject- By request I have added options for different version of Nvinject(0.1.3/0.2.0/0.2.1). If your not sure choose version 0.2.1 with the proper amount of RAM your video card. I have added a modified version of 0.2.1 for 1Gig of VRAM.?GMA950 - QE/CI+resolution change with some artifacts?GMA950 - No Artifacts QE/CI but no resolution.?GMAX3100 - suppose to give QE/CI(confirmed for device ID 0x2a02)
ForceDeth- This is compatible with most Nforce LAN.?ForceDeth-V - This is compatible with most Nforce LAN(recommended version)?Skge - Driver for most Marvell LAN cards.?RTL8187- Just as it says for Realtek 8187?Zydas USB- For the USB Wireless LAN adapter?Tiger IO80211- Some Atheros cards require this Tiger version to work. Default install is IO80211 from 10.5.2?Broadcom- WLAN driver for BCM4306/4309/4318/4320/4324?RT2500- Suppose to support Dlink WMP54G v4.0, may support some others.?ViaRhine- Just as it says, for ViaRhine chipsets?Intel 100Pro VE- Just as it says, for the Intel 100Pro VE chipset?RT2860- Driver for some chipsets like WL-181, may also work on some others.
You can choose to install or not, but I do recommend many of these useful programs. They include:
Adium?AppZapper?BBEdit?CandyBar?Colloquy?FireFox (for browsing BOARDS.SEGA.COM)?Gumby 50c?Invisibles?KCNScrew?KextHelper?Marvin's AMD Utility?MD5?Pacifist?PackageMaker version 2.1(old harder to find)?Stuffit Expander?Textmate?Transmission?TubeSock?Unison?VLC?Xbench
****************For help and support go to the PC forum at Boards.Sega.com******************