Software

Windows Xp Professional Black Edition [h33t][xnash]

  • Download Faster
  • Download torrent
  • Direct Download
  • Rate this torrent +  |  -
Windows Xp Professional Black Edition [h33t][xnash]

Download Anonymously! Get Protected Today And Get your 70% discount


Torrent info

Name:Windows Xp Professional Black Edition [h33t][xnash]

Infohash: 2F155E9A0E66F810915B06E943AD64C5BC221A7A

Total Size: 669.02 MB

Seeds: 0

Leechers: 0

Stream: Watch Full Movie @ Movie4u

Last Updated: 0000-00-00 00:00:00 (Update Now)

Torrent added: 2009-11-01 16:10:01






Torrent Files List


 

tracker

leech seeds
 

Torrent description

\./

(o o)

---------------------------oOOo-(_)-oOOo--------------------------

Windows XP Professional 32-bit en-US - Black Edition v2009.10.22

------------------------------------------------------------------





[#] INFOS (READ THIS).



(o) General Infos:



* This Windows XP was tested on a Intel Pentium 4 1,2 GHz Laptop and on a Intel Core 2 Duo 2,2 GHz Laptop.

* Unattended Installation (Prompt repair) + Original Serial and Windows Genuine Advantage Crack included and no Windows Activation needed.

* All Official and some Unofficial Windows XP Service Pack 3 Updates are included till 2009.10.14.

* A lot of Windows XP settings have been already set.

* Booting and Running is a little bit faster than a standard Windows XP, because some worthless Windows XP Files and Programs are removed and all Windows XP Updates are slipstreamed.

* Over 200 MB SATA/ACHI, and extra LAN & WLAN drivers already integrated.

* Audio & Video Codecs integrated to Decode & Encode almost all Audio & Video formats.

* After the Windows XP Installation is finished it is possible choose if the Preconfigured Windows XP Settings and the Extra Programs should be implemented but if nothing has been chosen in 60 seconds then the option Yes will be automatically selected.



(o) Important Infos:



* This Windows XP is not for Upgrading, you must make a clean installation on a formatted Hard Disk or Partition.

* Some Virtual Machine Programs will overwrite an important Config file (WINNT.SIF) with the standard program settings and this will result that the Extra Programs and Custom Settings will not be implemented and you will be asked to enter a Key. If you have this problem use a Key from the file "Original Working Keys.txt" in the folder "(Optical Disc)\KEY CHANGER" and AFTER Windows XP has been installed start the file "Auto Setup.bat" in the folder "(Optical Disc)\OEM\RunOnce". I recommend to use the Program VirtualBox at "http://www.virtualbox.org" this Program is free and is available for almost all Operating Systems and it will not mess around with any Windows config files.

* It is possible to add Extra Programs and Custom Settings that will be automatically implemented after the Windows XP installation is finished by editing the setting files (Open with notepad) in "(source)\OEM\RunOnce" folder. After the file "Auto Setup.bat" has been run the Config files can then be also found in "(System Drive)\Documents and Settings\Custom Settings" folder. If a settings file has been edited then the file must be run and the Computer must be restarted for the changes to take effect.

* If you try to install Windows XP and your Hard Disk Drive doesn't get detected or you get a Bluescreen after the first Windows XP loading screen then this normally means that the SATA driver for your Hard Disk Drive is missing, these steps here should help you to fix this problem:

1. If you get a Bluescreen then try to disable the SATA/ACHI option or set the SATA mode to IDE in your BIOS. If Windows XP starts now then install your SATA/ACHI driver, restart your Computer and change your BIOS SATA setting back.

2. If you get a Bluescreen or your Hard Disk Drive doesn't get detected, put the SATA driver on a Floppy Disk and use the F6 (Floppy Disk) option that comes up if you have booted Windows XP from the Optical Disc.

3. If you have no Floppy Disk Drive then use nLite at "http://www.nliteos.com" to integrate your SATA Driver directly into the Windows XP source. For more infos how to do this take a look at "http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml".

* If you want to be sure if the integrated SATA driver work with your Computer then use the Program VirtualBox to test it at "http://www.virtualbox.org" and set the Virtual Hard Disk Drive in VirtualBox form IDE to SATA and VirtualBox will then clone your SATA Controller.



(o) Infos For Newbies:



* Minimum System Requirements is 600 MHz Processor, 256 MB RAM, 4 GB Hard Disk Space, Super VGA (800x600) Video Adapter.

* Quick Guide how to install Windows XP new:

<- Step 1 Prepare ->

1. BACKUP YOUR FILES and download all the up-to-date Drivers for your Computer.

2. Select the option in your Burn Program for Burning an Image file, and then select the .iso file you want to Burn and Burn the Disc at a slow speed to avoid missing file errors when Windows XP gets installed. If you need a good Burn Program i recommend the free CDBurnerXP at "http://cdburnerxp.se/help/Data/burn-iso".

3. Go to your Mainboard or Computer manufacturer Website and look if there is a new BIOS update or an extra BIOS for Windows XP, if there is then update it. (This step can be skipped but is not recommended.)

<- Step 2 Install ->

4. Put your burned Windows XP Disc in your Optical Disc Drive and then turn your Computer off.

5. Start your Computer and in a few seconds you should see the text "Press any Key to boot from the CD." if you see this then you should press a Key on your Keyboard. If you don't get this message then you must set in your BIOS so that the Optical Disc Drive is the first BOOT device and your Hard Disk the second BOOT device.

6. Wait until Windows XP has loaded the drivers then press the "ENTER" Key on your Keyboard and then the "F8" Key and then the "ESC" Key.

7. Now select the Hard Disk Drive where you want to install Windows XP (Default is "C:\") and press the Key "D" on your Keyboard and then the Key "ENTER" and then the Key "L".

8. Now select the same Hard Disk Drive again and press the Key "ENTER" on your Keyboard and now select the option "Format the partition using the NTFS file system (Quick)" and then press the "ENTER" Key.

<- Step 3 set-up System ->

9. If Windows XP is installed go to "START -> Control Panel -> Regional and Language Options" and click all the options you can find there and change all Regional and Language settings to your Regional and Language you want to use.

10. Now you need only to install your up-to-date Computer Drivers and you are DONE :) If you can't find all the up-to-date drivers for your Computer then use the Program DriverMax at "http://www.innovative-sol.com/drivermax".

* If you are missing Programs like Microsoft Paint or Microsoft Outlook then take a look in the Favorites folder. There you will find Website Links to better Programs and a lot more.

* To change the Windows XP Key after Windows XP is installed use the tool "Keyfinder v1.51.exe" in the "(Optical Disc)\KEY CHANGER" folder. You can also change owner and company with "Keyfinder v1.51.exe".

* If you get a virus warning about the file "Keyfinder v1.51.exe" this is normal because all AntiVirus Programs are detecting Key Changers (Hack Tools) as a virus.

* If you have a question or a problem use Google or go to this Windows Support Forum "http://www.msfn.org". But don't expect that someone will help you, if your question or solution can be found in 10 minutes in Google or over the forum search option.